Right Angle AGP Connectors

Meritec’s Right Angle AGP (Accelerated Graphics Port) Connectors are the latest addition to Meritec’s family of Card Edge Connectors. The AGP interface has been designed specifically for dedicated use in high performance graphic controllers. The Right Angle AGP Connector allows you to add an AGP card to your system without adding all of the extra height. The connector is available in 0,400'' and 0,650'' stack heights, and both 0,100'' and 0,125'' solder tails.

 

Right Angle Accelerated
Graphics Port (AGP) Connector

 

 

Download Right Angle AGP Datasheet as PDF

 

Right Angle Universal AGP Connector

 Right Angle 3.3V and 1.5V AGP Connector



LAYOUT DRAWING ILLUSTRATED: 
RIGHT ANGLE UNIVERSAL AGP CONNECTOR

Dimensions in mm, [ ] = inches


 


RECOMMENDED MOUNTING HOLE PATTERNS
PER AGP SPECIFICATIONS, REV. 2.0

UNIVERSAL RIGHT ANGLE AGP CONNECTOR


 


UNIVERSAL CONNECTORS

LAYOUT DRAWING ILLUSTRATED: RIGHT ANGLE 3.3V AGP CONNECTOR

Dimensions in mm, [ ] = inches

 


RECOMMENDED MOUNTING HOLE PATTERNS
PER AGP SPECIFICATIONS, REV. 2.0

1.5V RIGHT ANGLE AGP CONNECTOR

 

3.3V RIGHT ANGLE AGP CONNECTOR




1.5V AND 3.3V CONNECTORS

FEATURES and BENEFITS:

  • Meets the AGP 2.0 specification
  • Available in 1,5V, 3,3V and universal configurations
  • Mounting clips provide retention to the PCB during the soldering process
  • Multiple card stack height options from 0,400'' - 0,650''
  • Plastic cover protects unused AGP connectors from dust and debris and supports connectors for hybrid soldering applications requiring convection/IR heating
  • Insert molded in liquid crystal polymer for stability
  • Designed to accept 0,062” AGP cards 

SPECIFICATIONS:

Electrical:

Contact resistance

Dielectric withstanding voltage

Current rating

Insulation resistance

 15 milliohm (maximum) 

500 VAC (minimum) @ 60 Hz

1.0 AMP per contact (continuous)

>1 x 109 ohms @ 500 VDC

Mechanical:

Contact material

Standard contact finish

Retention clip

Insertion force

Normal force

Dielectric material

 copper alloy

selectively plated contact surface consists of gold flash over nickel

solder plated copper alloy

100 grams nominal per opposing contact pair

90 grams nominal per contact 

glass filled black LCP

Environmental:

Temperature Range

Material		 -40°C to +105°C 

 U.L. rated 94 V-0



HOME | ABOUT | PRODUCTS | SOLUTIONS | CONTACT

If you experience any problems please contact webmaster@ap-products.com

Copyright © 2005 by A P Products GmbH - all rights reserved

Last update July 26, 2005