Flat Flex Cable (FFC)


Illustrated: Female to Female
Pinout:Pin 1 to Pin 1

This cable assembly is ideally suited for board-to-LCD interconnects. It saves space, is cost effective and easy to install. The low profile, overmolded strain relief is designed for critical mechanical applications. The folding and flexing features of the FFC laminated cable easily solve difficlut routing requirements.


Flat Flex Cable
Extraction Tool
Flat Panel Display (FPD) 2 Curcuit Power Cable Assembly


FEATURES and BENEFITS:

  • 0,5 mm (millimeter) laminated cable
  • 31 or 41 conductors
  • Mates with 1 mm dual row connectors
  • Compatible with Hirose DF9 and Harwin M40 connectors
  • Optional ZIF end to mates with 0,5 mm ZIF connectors
  • Molded strain relief
  • Reliable termination
  • Length and fold options available
  • Low profile
  • Suitable in notebook hinge areas
  • Extraction tool available
  • Consult factory for shielding and grounding requirements



SPECIFICATIONS:

Electrical:

Contact Resistance:
Dielectric withstanding
voltage:
Current rating:
Insulation resistance:		 30 milliohm (maximum)

300V RMS (minimum) @ 60 Hz
0,5 AMPS
>109 ohms @ 500 V DC

Contacts:

Material:
Finish:
Insertion force:
Withdrawal force:
 Copper alloy (CuNi)
Tin lead
197 grams, 6,94 oz. / 0,4343 lbs. (nominal)
30 grams, 1,058 oz. / 0,06614 lbs. (nominal)

Cable:

Insulator:
Conductor:
Plating:
Minimum Bend Radius:
Length Tolerances:
    		Polyester
flat solid 33 AWG equivalent
Tin lead
0,020 inches
under 12'' +/- 0,10''
over 12'' +/- 0,25''
Length is measured from end to end in inches including connectors

Environmental:

Material:
Temperature rating:		 U.L. rated 94 V-1
-40°C to +105°C


HOME | ABOUT | PRODUCTS | SOLUTIONS | CONTACT

If you experience any problems please contact webmaster@ap-products.com

Copyright © 1998 by A P Products GmbH - all rights reserved

Last update February 23, 1999