Intra Connector

The Testing Connector system that probes the inaccessible circuits on flat cable systems.

When you wanted to test for a problem that might lie on the circuit board or in the cable, you had a problem. Inaccessible? Not with an A P PRODUCTS Intra-connector system. The Intra-Connector system mates in-line with standard double row socket connectors. It has one set of female contacts, but two sets of male contacts at right angles. So, it provides instant line-by-line "probe-ability".

The pins can also be used to make daisy chaining possible from a single connector cable end. Modified configurations are quickly available for special connections. The Intra-Connector system provides both straight-in and right angle functions. It mates with a standard 2,54 mm x 2,54 mm dual row connector or PC board-mounted 0,64 mm square pins. Two Intra-Connector systems used with the Intra-Switch system form a complete test assembly for probing signals under no load and full-load conditions.

Contacts are non-corrosive Alloy 770 body is glass-fulled polyester thermo-plastic. Compatible with 3M, T&S/Ansley, Berg, Amp, Symbex and many other sockets and mating headers.